Answers are grounded in this paper and cite their sources.
The friction and wear behavior of multi-wall carbon nanotube (MWCNT)-reinforced Ti composite were evaluated under dry sliding conditions. Ti powders were immersed in suspended 3.0wt.% MWCNTs in a zwitterionic surfactant solution to prepare the composite. To eliminate the solid zwitterionic substance, coated Ti powders were heated at 873 K for 3.6 ks under a mixed H₂/Ar gas atmosphere. Coated Ti powders were mixed with pure Ti powders at ratios of 0, 20, 50 and 100 in wt.%. Spark plasma sintering and hot compression were applied to consolidate the mixed powders. Subsequently, a ball-on-disk test was carried out at a rotational speed of 120 rpm with different applied loads of 0.98, 1.96 and 2.94 N by using 304 stainless steel balls as a counter material. The friction coefficient of each specimen decreased with increasing MWCNT content and applied load.
No takes yet. Share an insight, caveat, or question.
Threrujirapapong et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: