Answers are grounded in this paper and cite their sources.
Photodetectors with two-dimensional (2D) materials on a SiO 2 /Si substrate have been extensively explored. However, these photodetectors often suffer from a large gate voltage and relatively low photoresponsivity due to the low efficiency light absorption of 2D materials. Here, we develop a MoS 2 photodetector based on the Al 2 O 3 /ITO (indium tin oxide)/SiO 2 /Si substrate with ultrahigh photoresponsivity of 2.7 × 10 4 A W −1 . Most of the incident light is reflected by the interface of stacked Al 2 O 3 /ITO/SiO 2 substrate, which significantly increases the light absorption of 2D materials. With the help of thinner and high- κ Al 2 O 3 dielectric, the current ON/OFF ratio could exceed 10 9 with a gate voltage no more than 2 V. Enhanced gate regulation also brings about a relatively high mobility of 84 cm 2 V −1 s −1 and subthreshold swing of 104 mV dec −1 . Additionally, two different photocurrent generation mechanisms have also been revealed by tuning the gate voltage. The reflection-enhancement substrate assisted MoS 2 photodetector provides a new idea for improving the performance of 2D material photodetectors, which can be perfectly combined with other methods.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: