Answers are grounded in this paper and cite their sources.
The effect of additives on the properties of lead titanate was investigated. The additives employed were selected on the basis of potential solid solution or liquid formation with PbTiO 3 during sintering. Most of these additives aided sintering and produced dense polycrystalline specimens of PbTiO 3 with densities in the range 89 to 95% of theoretical. The dielectric constant and dissipation factor were found to vary considerably, depending on the additive employed. Some poled specimens exhibited a piezoelectric coefficient, d 33 , as high as 130 × 10 −12 coulombs per newton with a dielectric constant of about 160 at room temperature. The microstructure of some of the specimens was also studied and a texture similar to that of barium titanate was observed for those specimens which gave the higher piezoelectric response.
No takes yet. Share an insight, caveat, or question.
Tien et al. (1962) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: