Answers are grounded in this paper and cite their sources.
The precipitation of calcium carbonate, brought about by mixing aqueous solutions of calcium nitrate and sodium carbonate in a continuous reactor, has been studied. The pH (8.5‐10.0), reagent concentration (0.25‐1.7 N), temperature (15‐60°C), residence time (1‐3 min), and mixing speed (100‐500 rpm) were chosen so that the effects of agglomeration could be examined The presence of agglomerates was confirmed by microscopy. Precipitate size distributions were log normal, and the geometric mean diameters, ranging from 5 to 13 p.m, were extremely sensitive to pH. Large precipitates were obtained under conditions favouring a high agglomeration rate; namely high temperatures, concentrations, and mixing speeds. The effect of residence time was minimal. The geometric standard deviation increased with the mean size of the precipitate. The solids recovery decreased with increasing temperature, but was not significantly affected by the other parameters
No takes yet. Share an insight, caveat, or question.
Maruscak et al. (1971) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: