Answers are grounded in this paper and cite their sources.
This paper investigates the feasibility of using recycled plastic composed of polypropylene (PP) and high-density polyethylene (HDPE), as a basis for the fabrication of plastic bricks for non-structural walls starting from the material characterization. The deformation properties of plastic bricks were evaluated under the application of compression, flexural and traction forces; the thermal analysis of the material was carried out by means of the ignition test, differential scanning calorimeter (DSC) and its water ab-sorption capacity was also tested. Satisfactory results were obtained in the tests carried out; It was found that the compressive strength of the material complies with the requirements of standard specifications for conventional bricks (clay - concrete), and the physicochemical properties of the composite meet specifications of material for use in non-structural walls; which makes it an innovative material with enormous potential for use in the construction sector.
No takes yet. Share an insight, caveat, or question.
Rodríguez et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: