Evaluation of Breakdown Characteristics of Gas Insulated Switchgears for Non-standard Lightning Impulse Waveforms - Breakdown Characteristics for Double-frequency Oscillations under Non-uniform Electric Field

An effective means of rationalization of insulation design for gas insulated switchgear (GIS) is the evaluation of insulation characteristics under actual surge waveforms in the field called non-standard lightning impulse waveforms (non-standard-LIWs). The preceding researches examined quasi-uniform electric field SF6gas gaps and partly the cone-shaped insulating spacers that represent an insulation element of GIS in order to obtain the insulation characteristics under various non-standard-LIWs. As a result, the breakdown voltages under non-standard-LIWs are higher than those under standard-LIWs, allowing the authors to identify a road map for rationalizing GIS insulation designs. In applying this rationalization technique, experimental study was conducted on single-frequency oscillations to identify the influence of the non-uniform electric field. As a result, the breakdown characteristics were found to be different from those in a quasi-uniform electric field. This paper describes the insulation characteristics under double-frequency oscillations as typical examples of nonstandard-LIWs while varying the applied voltage polarities, frequencies, and damping factors in order to study the influences of non-uniform electric field in further detail. The experimental results show that positive-polarity waveforms pose more demanding insulation requirements and that it is appropriate to conduct experiments using positive-polarity in order to consider dielectric strengths. Moreover, it was confirmed that changing the waveform parameters under positive-polarity did not cause major changes in the breakdown voltages, which remained constantly higher than those under standard-LIWs, and gave little influence to the application of the rationalization techniques.