Answers are grounded in this paper and cite their sources.
This study investigates the undrained shear behaviour and static liquefaction potential of sand in various consolidation states, with a particular emphasis on very loose sand under low effective confining stresses, where a unique Normal Consolidation Line (NCL) is observed. Based on this NCL and the boundaries of Critical State Line (CSL), the samples were classified into four states: heavily overconsolidation state (HO), intermediate overconsolidation state (IO), lightly overconsolidation state (LO), and normally consolidation state (NC). The study findings revealed significant differences in the undrained shear behaviour among samples in different consolidation states. Samples in (HO) and (IO) overconsolidation states exhibited a tendency of initial contraction followed by dilation, with the difference lying in the presence of a distinct peak strength (qpeak). In contrast, samples in (LO) and (NC) only showed a contraction tendency, with the difference being in residual strength (qresidual). Finally, exploration was conducted into the potential for static liquefaction under different consolidation states. The study found that for overconsolidated samples, their liquefaction potential is mainly controlled by the state parameter (ψ), increasing with ψ. Conversely, for normally consolidated samples, their liquefaction potential is determined by the initial mean effective stress (p’0), it decreased with higher p’0.
No takes yet. Share an insight, caveat, or question.
Shamas et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: