An Indirect Laser-Induced Temperature Jump Determination of the Surface pKa of 11-Mercaptoundecanoic Acid Monolayers Self-Assembled on Gold

The indirect laser-induced temperature jump (ILIT) method is used to determine the acidity (p K a ) of monolayers composed of 11-mercaptoundecanoic acid (MUA) self-assembled on vapor-deposited gold film electrodes in contact with either 0.10 or 1.0 M ionic strength NaClO 4 electrolyte solutions. The ILIT technique may be used to measure the p K a of a surface-attached acid because the magnitude of the ILIT response is related to the potential gradient at the electrode/electrolyte interface which is, in turn, related to the extent of ionization of the acid. The relevant data are the potentials of zero ILIT response versus pH. A simple two-layer model of the acid-modified electrode/electrolyte interface and Gouy−Chapman double layer theory (modified for the onset of dielectric saturation effected by the large concentration of charge present at this interface when a substantial fraction of the carboxylic acid moieties are ionized) were employed to analyze these data. This analysis gives p K a = 5.7 ± 0.2 at 0.10 M ionic strength and p K a = 4.4 ± 0.2 at 1.0 M ionic strength while the total concentration of MUA comprising the self-assembled monolayer is determined to be essentially the same at both ionic strengths, averaging (5.4 ± 0.3) × 10 -10 mol/cm 2 . Reasons for the observed variation of p K a with ionic strength are discussed.