Answers are grounded in this paper and cite their sources.
Carbon is known to be the most effective dopant to enhance the high-field current-carrying capacity for high-power applications of MgB 2 superconductors. Using B 4 C instead of B to synthesize MgB 2 will be expected to produce superconducting MgB 2 together with in situ carbon doping. By using just two reaction substances, B 4 C and Mg, superconducting MgB 2 –B 4 C composites with MgB 2 fractions ranging from 18 to 85% were fabricated successfully by solid-state reaction. The influence of the grain size of the B 4 C raw material on the critical current density ( J c ), the fraction of MgB 2 , and the critical transition temperature ( T c ) of MgB 2 –B 4 C composites were investigated. T c , J c , and the fraction of MgB 2 were increased with decrease in the grain size of the B 4 C raw material. Compared with a pure MgB 2 superconductor, the critical transition temperature of the MgB 2 composites fabricated with small B 4 C grain size was suppressed slightly, but the in-field current-carrying capacity was improved significantly. By using B 4 C raw material with a grain size of 2.5 μm, the resultant superconducting composite showed a critical transition temperature of 33.0 K, a high self-field J c of 0.7 × 10 6 A cm −2 , and a remarkable in-field current density value of 1 × 10 4 A cm −2 under 6 T at 10 K. These results indicate that the composites can be applied directly in high-power applications of superconductors. The enhancement of flux pinning in the superconducting MgB 2 –B 4 C composite is discussed and considered to be mainly due to the increment in the effective surface area of grain boundaries per unit volume.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: