Answers are grounded in this paper and cite their sources.
The system BaTiO 3 –SiO 2 is characterized by two congruently melting compounds and a compound having a subsolidus stability maximum. A barium analogue of the mineral sphene, BaTiSiO 5 , was shown to melt congruently at 1400°C, and BaTiSi 2 O 7 melted congruently at 1250°C. The gem mineral benitoite (BaTiSi 3 O 9 ) was synthesized hydrothermally and was shown to decompose below the solidus to form BaTi‐So 2 O 7 and SiO 2 when heated above 965°C, hydrothermally or above 1050°C, dry. Three eutectics in the system were determined: at 1245°C. and 70 mole % SiO 2 , at 1246°C. and 63% SiO 2 , and at 1260°C. and about 29% SiO 2 . Glasses with high refractive indices were obtained over a limited range of compositions. The cubic‐hexagonal transition temperature in barium titanate was raised sharply by small additions of silica. The maximum inversion temperature observed was 1575°C. and must have been due to limited solid solution of SiO 2 in BaTiO 3 . Summary Three intermediate compounds have been shown to exist in the system BaTiO 3 ‐SiO 2 . The barium analogue of sphene, BaTiSiO 5 , melts congruently at 1400°C, and BaTiSi 2 O 7 melts congruently at 1250°C. The compound BaTiSi 3 O 9 (benitoite) was found to dissociate to form BaTiSi 2 O 7 and SiO 2 at 1050°C, under dry conditions and at 965°C, hydro‐thermally. This important gem mineral was synthesized from completely melted and quenched stoichiometric mixtures treated hydrothermally below 965°C, and at a water pressure of 5000 lb, per sq. in. There are three simple eutectics in the system: one between BaTiSi 2 O 7 and SiO 2 at 1245°C, and 70 mole % SiO 2 ; one between BaTiSi 2 O 7 and BaTiSiO 5 at 1246°C, and 63% SiO 2 ; and one between BaTiSiO 5 and BaTiO 3 at 1260°C, and about 29% SiO 2 . It was fairly easy to obtain glasses having refractive indices between 1.70 and 1.88 over a composition range of 50 to 75% Silica. The data pertaining to the cubic‐hexagonal transition in barium titanate were best explained on the basis of limited solid solution. As a result of the solid solution, the cubic‐hexagonal transition temperature is raised sharply from 1460°C. for the pure barium titanate to about 1575°C. by small additions of silica. The limits of solid solubility are approximately 8 and 4% SiO 2 for the cubic and hexagonal forms, respectively.
No takes yet. Share an insight, caveat, or question.
Rase et al. (1955) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: