Answers are grounded in this paper and cite their sources.
This article intends to clearly define the possibilities and limitations offered by a simple diffusion approach of drying. Actually, many works use a simple diffusion equation to model mass transfer during drying, probably because a simple analytical solution of this equation does exist in the case of simple boundary conditions. However, one has to be aware of the limitations of this approach. Using a comprehensive formulation and a relevant computational solution, the most frequent assumptions of the diffusion approach were rigorously tested. It is concluded that analytical solutions must be discarded for several reasons: analytical solutions, either using Dirichlet or third kind boundary conditions, are often misleading and should be avoided; in the drying process, the coupling between heat and mass transfer is mandatory; nonlinearity (variation of diffusivity with moisture content) can hardly be avoided for mass transfer. In order to reach a verdict, a dimensionless number, the Drying Intensity Number (NDI), is introduced. It allows the level of coupling between heat and mass transfer to be easily assessed. Thanks to this number, a guide is proposed for choosing the right level of modeling, depending on the drying configuration.
No takes yet. Share an insight, caveat, or question.
Patrick Perré (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: