Answers are grounded in this paper and cite their sources.
Molybdenum-based catalysts were investigated for the hydrodeoxygenation of guaiacol to phenol under mild conditions. To compensate for the low hydrogen activation ability of Mo, various metals were tested as additives to modify the MoOx/TiO2 catalyst. Ag was found to be an effective additive metal, and hydrodeoxygenation of guaiacol proceeded over the MoOx-Ag/TiO2 catalyst at a lower temperature than previously reported, giving phenol in 59 mol % yield (503 K, H2 3 MPa). Methanol was the main C1 product derived from the methoxy group of guaiacol. The catalyst can be reused after calcination to remove surface-deposited organic species. The catalytic activity was sharply increased by the increase of Mo or Ag amount at low loading amount range and was slowly increased at a high amount range. The physically mixed catalyst of MoOx/TiO2 and Ag/TiO2 was much less active than MoOx-Ag/TiO2. These trends suggest that the catalytically active sites are bimetallic MoOx-Ag interface sites. TEM-EDX, XRD, H2-TPR, H2-TPD, XAS, reaction kinetics, and stoichiometric reaction with reduced catalyst suggest that highly dispersed Mo4+ species and nanosized Ag clusters on TiO2 are responsible for guaiacol hydrodeoxygenation, and the methoxy group is eliminated due to the oxophilic nature of Mo4+, leading to the formation of phenol.
No takes yet. Share an insight, caveat, or question.
Tochihara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: