Answers are grounded in this paper and cite their sources.
The processing of complex fluids of evolving rheology in stirred tanks frequently occurs in the transitional flow regime, where CFD methodologies are not yet generalisable. This study uses measurements of power draw taken across all flow regimes to assess the predictive capability of existing turbulence closure models, focusing on the transitional regime. Experiments were conducted in baffled tanks at 5 L (lab) and 170 L (pilot) scales, both equipped with a Lightnin A320 wide-blade hydrofoil impeller, with Newtonian and non-Newtonian fluids of varying rheology. Power number ( N p ) was inversely proportional to Reynolds number ( Re ) in laminar flow ( K p = 62) and stabilised at N p = 1.21 in fully turbulent flow. The non-Newtonian fluids were effectively modelled with the Metzner-Otto approach and align with the Newtonian power curve but should be applied cautiously beyond Re = 30. CFD simulations using laminar, Generalised k - ω (GEKO), and Stress-Blended Eddy Simulation (SBES) models were validated against experimental data for Newtonian fluids at lab scale. The SBES model provided superior accuracy in the transitional regime, capturing the correct energy dissipation, while the GEKO model only offered sufficient accuracy to determine the impeller torque. However, both models exhibited limitations in capturing the full complexity of turbulence at high Reynolds numbers. • Power draw of A320 impeller measured and modelled in transitional regime. • Power measurements made at two scales with both Newtonian and non-Newtonian fluids. • CFD closures used were laminar, GEKO, and SBES using Ansys Fluent. • SBES model superior whilst GEKO model only accurate enough for torque. • Metzer-Otto method effective up to Re = 30 for non-Newtonian fluids.
No takes yet. Share an insight, caveat, or question.
Wadsley et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: