Answers are grounded in this paper and cite their sources.
The effect of alloying additions of Mo and Ta (0.4 at% each) on the microstructure, mechanical properties, oxidation resistance and coarsening resistance of the L1 2 -strengthened (γ’) Al-rich Ni 51 Co 18 Fe 5 Cr 10 Al 12 Ti 4 alloy was determined. The micro-alloyed composition exhibited improved yield strength (from room temperature to 1000 ° C) and coarsening resistance (enhanced by 33 % at 800 ° C) compared to the base Ni 51 Co 18 Fe 5 Cr 10 Al 12 Ti 4 alloy. The present Al-rich alloy compositions (both the micro-alloyed and reference compositions) exhibited superior oxidation resistance (800–1000 ° C) compared to a Ti-rich Ni 51 Co 18 Fe 5 Cr 10 Al 8 Ti 8 alloy (with similar precipitate volume fraction and (Al+Ti)-content) and commercial Inconel 718. The present work highlights the promise of Al-rich γ’-strengthened Al-Co-Cr-Fe-Ni-Ti alloys as candidates for high-performance, high-temperature structural materials, characterised by an attractive blend of strength, resistance to coarsening, and resilience against oxidation. • Micro-alloyed Al-rich Al-Co-Cr-Fe-Ni-Ti HESA (HESA-3A) exhibited attractive blend of strength, resistance to coarsening, and resilience against oxidation • HESA-3A exhibited high volume fraction of γ′-phase (>64 %) and elevated γ′-dissolution temperature (>1180 ° C) • HESA-3A exhibited low coarsening rate of 2.8 * 10 −28 m 3 /s at 800 ° C. • Al-rich HESAs displayed an activation energy of ∼220 kJ/mol for oxidation.
No takes yet. Share an insight, caveat, or question.
Joseph et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: