Answers are grounded in this paper and cite their sources.
Dislocation density in β-Ga2O3 has been determined by chemical etching for four (100), (010), (001), and (2̄01) orientated samples by employing a distillation apparatus to maintain the etch conditions where dislocations and voids can be well identified. Severe non-uniform distribution of etch pits was found where mean and standard deviation of dislocation density from a large amount of measurements are proposed for evaluating the quality of the β-Ga2O3 single crystal. It was found that (001) orientated sample has the minimum mean dislocation density around 103 cm−2, one order less than the other orientated samples. Intertwined dislocations for the (010) orientated sample, single dislocation lying on (100) for the (001) orientated sample, and a stack of dislocations lying on the (2̄01) plane for the (100) orientated sample have been observed. The anisotropy growth of dislocations and voids, their migration and interaction, and direction-dependent etch rate are believed to be the root cause for the formation of a variety of etch patterns and orientation-related dislocation densities. With higher etchant concentration, less etch time and lower magnification images are suggested for accurately computing the etch pit density.
No takes yet. Share an insight, caveat, or question.
Wei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: