Answers are grounded in this paper and cite their sources.
In this work, CeO2 nanoparticles were synthesized via the chemical precipitation method. With this objective, two distinct surface functionalization methodologies were applied: the first one uses anionic surfactant (SDS), and the second one uses hexadecanoic acid (C16H32O2). During the development of this work, nanostructured films were obtained via direct mixing and the solvent evaporation method (in situ and ex situ). This material was characterized via thermogravimetry (TGA), differential scanning calorimetry (DSC), field emission gun scanning electron microscopy (FEG-SEM), infrared absorption spectroscopy (FTIR), Raman spectroscopy and X-ray diffraction (XRD). By XRD, when there is adequate incorporation and dispersion of nanoparticles, the characteristic peaks of the CeO2 crystalline planes are observed in the nanocomposites, and by SEM, their microstructures are evaluated to verify the dispersion. The results obtained showed that the synthesis protocols tested for the intended nanocomposite, with in situ or ex situ functionalization, were satisfactory. According to these results, it was possible to observe the agglomeration of nanoparticles without functionalization and confirm the nanometric scale for CeO2 nanoparticles synthesized without functionalization and with in situ functionalization (SDS), and their diameters were between approximately 10 and 15 nm. Additionally, for the PMMA powder, the Tg was 114 °C, whereas for the nanocomposite films, it averaged 53 °C, suggesting that the solvent acts as a plasticizing agent in the studied samples, thus reducing the Tg value. However, when samples obtained from the ex situ protocol by phase transfer with palmitic acid were analyzed, uncertainties were found regarding the adequate dispersion of CeO2 nanoparticles in PMMA, with in situ functionalization by SDS being the most promising.
No takes yet. Share an insight, caveat, or question.
Palazzo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: