Answers are grounded in this paper and cite their sources.
Chitosan (CTS), Na-montmorillonite (MMT), and CaCO₃ nanoparticle hybrid nanocomposites (NCs) were developed via a solution blending and film-casting process and were studied for structural, dielectric, and photocatalytic properties. Several formulations were prepared; however, two representative samples (MMT 0,62 /CTS 0,37 /CaCO₃ 0,01 and MMT 0,5 /CTS 0,3 /CaCO₃ 0,2 ) were selected for detailed characterization, based on prior optimization studies that identified these ratios as the most relevant for structural and functional analysis. Characterization was assured by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and impedance spectroscopy (IS). Although TEM images revealed clear exfoliation and increased interlayer distance, XRD patterns revealed intercalated nanostructures, evidence of successful preparation of the nanocomposite. Interactions between components were also verified by FTIR spectra. High-performance liquid chromatography (HPLC) was employed for the purpose of assessing the photocatalytic degradation of Rhodamine B (RhB). Results showed removal efficiencies of 95.4 ± 0.02 % and 81.7 ± 0.02 %, respectively, during UV-LED exposure; these results were corroborated by error analysis and repeated trials. Dielectric properties between 40 and 150 °C exhibited frequency- and composition-dependent behavior, consistent with Maxwell–Wagner–Sillars interfacial polarization and Debye-type relaxation processes. The low CaCO₃ content formulation exhibited large real part of dielectric constant and moderate loss tangent, making it promising for applications such as capacitive energy storage. The CaCO₃-dominant sample possessed low dielectric loss and frequency-independent permittivity, suggesting the potential of this sample for use in radiofrequency (RF)- or low-loss technology. The results indicate the multi-functionality of CTS/MMT/CaCO₃ nanocomposites and how the control of microstructure through inorganic loading can be exploited in order to design materials for environmental applications and electronics applications.
No takes yet. Share an insight, caveat, or question.
Lahbib et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: