Answers are grounded in this paper and cite their sources.
We present a computational fluid dynamics framework for simulating polymer melt flow in material extrusion hot-ends, with a focus on Fused Deposition Modeling (FDM) systems. The framework employs a hybrid constitutive description that captures solid-like behavior upstream of the melting region and shear-thinning, temperature-dependent melt rheology downstream. This formulation enables a continuous transition across the glass transition temperature based solely on intrinsic material properties, without the use of case-specific tunable parameters. The thermal boundary conditions at the liquefier walls are derived from energy conservation principles and incorporate thermal resistance at the polymer–wall interface, eliminating the need for empirical calibration against experimental data. The model also accounts for upstream thermal coupling with the heat-sink section of the hot-end, which influences the inlet temperature imposed at the computational domain boundary. The momentum boundary condition is defined using a mixed slip/no-slip formulation to represent the air-gap region at the entrance of the filament into the hot-end, capturing the transition from partially constrained to fully developed wall contact conditions across the melting front. These physically based assumptions lead to predictions that are consistent with experimental feeding-force measurements. The model is validated against published data for high-impact polystyrene (HIPS), polylactic acid (PLA), and acrylonitrile butadiene styrene (ABS). The simulations accurately reproduce feeding-force magnitudes and capture the transition from stable to unstable extrusion behavior at high feed rates.
No takes yet. Share an insight, caveat, or question.
Sokhanvari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: