This is the authors' abstract. We don't add key points for this paper.
• Epoxy/GPTMS CF/MWCNTs composite shows excessive chain confinement at the interface. • Epoxy/GPTMS CF/MoS 2 composite shows crack deflection and random ridge formation. • Epoxy/GPTMS CF/MWCNTs-MoS 2 shows partial chain confinement at the interface. • Epoxy/GPTMS CF/MWCNTs-MoS 2 shows 24 % improvement in interlaminar shear strength. • Epoxy/GPTMS CF/MWCNTs-MoS 2 shows improvement in the T g from 66 °C to 74.3 °C. The mechanical performance of carbon fibre (CF) reinforced epoxies can be enhanced with surface modification techniques. A combination of surface treatment on carbon fibres with liquid-phase oxidation using hydrogen peroxide and subsequent grafting of three-dimensional (3D) hybrid nanoparticles has been considered an effective technique to enhance the interfacial interaction between epoxy and carbon fibres. 3D molybdenum disulfide (MoS 2 ) functionalized MWCNTs hybrid nanoparticles were synthesized by in-situ hydrothermal route. The proposed nanoparticle grafted CFs show improved flexural and interlaminar shear strength (ILSS) alongside improved strain, for epoxy/CF composites. The partially constrained epoxy chain confinement effect at the epoxy-CF interface confirmed the synergistic effect of the MWCNTs–MoS 2 hybrid. Unmodified epoxy/CF composites showed ILSS and corresponding strain values of 38 MPa and 1.07 % respectively alongside the flexural strength of 558 MPa. Epoxy composites reinforced using CFs grafted with MWCNTs and MoS 2 showed an improved ILSS value of 42 MPa 41.4 MPa respectively and the composites showed a flexural strength of 591 MPa and 594 MPa respectively. The proposed epoxy/GPTMS-CF/MWCNTs-MoS 2 composite samples showed the highest ILSS and corresponding strain values of 47 MPa and 1.41 % respectively alongside the highest flexural strength of 623 MPa. Dynamic mechanical analysis showed an improvement in the glass transition temperature (Tg) of the epoxy/GPTMS-CF/MWCNTs-MoS 2 composites from 66 °C to 74.3 °C due to improved interfacial interaction. The fractographic analysis showed a consistent ridge formation during initial loading and complete separation of MWCNTs-MoS 2 nanoparticles from the CFs surface, when the load exceeded before the failure, demonstrating the partial confinement effect.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Varghese et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: