Answers are grounded in this paper and cite their sources.
This study presents the development of an eco-efficient laboratory-scale production route for long steel products, focusing on sustainable casting and hot deformation processes. Conventional casting using 80x80 mm molds and gravity filling generated significant shrinkage defects, leading to scrap generation, repeated melting, and reduced material efficiency. Alternative mold designs with a 15° inclination and exothermic feeders were evaluated via simulation software, minimizing defects and enabling Ø70 mm castings with 20% less raw material. A new laboratory-scale hot rolling unit replaced hydraulic presses, achieving the target Ø29 mm round cross-section in a single cycle with a 0.83 reduction ratio, increasing specimen yield and reducing energy consumption. Equipment selection prioritized the reuse of idle industrial motors and gearboxes, aligning with circular economy principles. Mechanical testing and microstructural outcomes obtained from the new process were closer to industrial production standards, demonstrating not only enhanced process yields but also improved product quality. Overall, the combined process modifications reduced scrap, minimized energy use, and leveraged existing resources, demonstrating a practical, sustainable and eco-friendly approach for laboratory-scale steel production.
No takes yet. Share an insight, caveat, or question.
Emre Alan (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: