Answers are grounded in this paper and cite their sources.
This study simulates a n-i-p planar heterojunction for Na 2 SnBr 6 -based perovskite solar cells (PSCs) , with Na 2 SnBr 6 as the absorber layer, fluorine-doped tin oxide (FTO) as the substrate, and In 2 S 3 , IGZO, and SnS 2 as electron transport layers (ETLs). Gold (Au) is used as the back contact. Na 2 SnBr 6 was chosen for its low cost, non-toxicity, tunable band gap, excellent electrical properties, and stability. The SCAPS-1D simulator was employed to model the solar cell performance under AM 1.5 G light irradiation, focusing on factors like doping concentration, layer thickness, defect density, and interface defects across three device configurations: Device I (Au/Na 2 SnBr 6 / In 2 S 3 /FTO/Al), Device II (Au/ Na 2 SnBr 6 /IGZO/FTO/Al), and Device III (Au/ Na 2 SnBr 6 /SnS 2 /FTO/Al). Device III achieved the highest PCE of 31.35%, FF of 85.95%, V OC of 0.7926 V, and J SC of 46.01 mA/cm 2 2 , making it a promising candidate for high-efficiency, lead-free perovskite solar cells. Devices I and II showed lower efficiencies of 27.47% and 30.98%, respectively. The study also analyzed quantum efficiency (QE), carrier dynamics, and recombination rates, highlighting the potential of Device III in advancing Na 2 SnBr 6 -based hybrid perovskite solar technologies for future solar energy applications.
No takes yet. Share an insight, caveat, or question.
Reza et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: