Answers are grounded in this paper and cite their sources.
Two non-contact remote ultrasonic detection systems are compared. The first consists of a continuous wave (CW) Nd:YVO4 laser operating at 532 nm used in conjunction with a photo-induced electromotive-force (EMF) sensor. The second system employs an air-coupled capacitance transducer that has a bandwidth from 100 kHz up to 2 MHz. Both systems exhibit higher sensitivity to out-of-plane than in-plane measurements of stress wave signals. Ultrasound generation is carried out by an Nd:YAG pulsed laser at 532 nm in the thermoelastic regime in a 1.6 mm aluminum plate. A0 Lamb mode is generated at frequency-thickness product with strong out-of-plane displacements. Ultrasonic waveforms acquired are reported and the performance advantages of the two remote non-contact detectors are compared with each other. For lower frequency tests (up to 2 MHz), better results have been achieved with the air-coupled transducer that also has superior overall performance and benefits. The tests enabled direct comparison of air-coupled transducer and photo-EMF detector.
No takes yet. Share an insight, caveat, or question.
Cerniglia et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: