Answers are grounded in this paper and cite their sources.
A new oscillating bubble method is used to measure surfactant mass transfer kinetics at liquid–gas interfaces. A spherical bubble is formed, equilibrated, and oscillated radially with a small amplitude. The radial oscillations cause the gas-phase pressure to cycle about its equilibrium because of the periodic changes in bubble curvature and surface tension. The phase angle θ between the radial and the pressure oscillations and the amplitude ratio of these two quantities are measured as a function of forcing frequency ω′ and concentrationC′(0). These data are analyzed according to a linear analysis presented in part I of this research (J. Colloid Interface Sci.168,21, 1994) to find surfactant diffusivities and adsorption/desorption coefficients. The required input data are the equilibrium adsorption isotherm and the corresponding surface equation of state. For 1-decanol at the air–aqueous interface, equilibrium surface tension data are obtained by video-enhanced pendant bubble tensiometry and fitted to the generalized Frumkin model. The oscillating bubble method is then used to determine the mass transfer kinetics of 1-decanol. For ω′ ≤ 1 rad/s, the mass transfer is diffusion-controlled. Diffusivities found from the oscillating bubble data are in agreement with those obtained from pendant bubble relaxation data. For elevatedC′(0)and ω′ ≥ 1.0 rad/s, the mass transfer is controlled by both diffusion and the kinetics of adsorption–desorption. A mixed diffusion–kinetic model applied to these data yields a value for the desorption kinetic constant of α = 2.7 s−1. These results are consistent with the shift in controlling mechanism from pure diffusion control at dilute concentrations to mixed diffusion–kinetic control at elevated concentrations.
No takes yet. Share an insight, caveat, or question.
Kathleen J. Stebe (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: