Answers are grounded in this paper and cite their sources.
Laboratory study demonstrates pressurized seepage causes pore expansion and redistribution in argillaceous slate, indicating local opening rather than full pore-network destruction.
Pressurized seepage alters the water-accessible pore system of clay-mineral-rich slate, but its scale-dependent response remains unclear. Argillaceous calcareous slate from the Lower Cambrian Qiongzhusi Formation (Є1q) was investigated using paired low-field NMR measurements on two specimen batches before and after 72 h treatments at nominal 0 MPa (low-head seepage), 1, 3, and 5 MPa. Total pore volume, pore-size composition, characteristic radii, and pore-size non-uniformity were evaluated. The total pore-volume increment increased from 0.98% to 1.43% in Batch I and from 0.88% to 1.56% in Batch II between 0 and 5 MPa. The dominant peak remained near 1.2 × 10−2 μm, whereas its amplitude and large-pore spectral tail increased. The combined nanopore and micropore proportion decreased from 90.16–95.28% before treatment to 83.13–89.69% after treatment. The macropore increment increased from 0.15%/0.16% to 0.52%/0.52% in Batches I/II, while r50, r60, and Cu increased and r10 changed only slightly. Sensitivity analysis over ρ2 = 5–50 μm/s preserved the larger-pore enhancement. These results indicate pressure-enhanced opening, water accessibility, and local redistribution of pre-existing pores rather than extensive pore-system reconstruction, providing a pore-scale reference for seepage-related deterioration assessment.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: