Answers are grounded in this paper and cite their sources.
The problem of waste generation has rapidly become a serious issue of concern for many scholars. This study takes the problem of waste that is generated from construction fields, such as demolished concrete, glass and aims to reuse the construction and demolition debris for use as aggregates in construction purpose. Study involving reuse of demolition waste like demolished concrete, glass as partial replacement of coarse and fine aggregate up to 20% was performed before. But in those studies, either coarse aggregate is replaced with demolition waste or fine aggregate was replaced with glass. This study attempts to fully replace coarse aggregate with demolished concrete and crushed glass as partial replacement of fine aggregate to a content of 20, 25 and 30%, respectively. The main findings of this investigation revealed that using glass in lieu of sand at 30% replacement as fine aggregate gives maximum compressive strength which is significantly greater than M35 (35 MPa) grade concrete and nearing M40 (40 MPa) to M45 (45MPa) grade concrete, which indicates the suitability of use in various constructions. It also revealed that with increasing quantity of glass the corresponding strength increase doesn’t occur linearly, but the rate of increase gradually slows down with increasing of the amount of glass in the concrete samples.
No takes yet. Share an insight, caveat, or question.
Bhuiyan et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: