Answers are grounded in this paper and cite their sources.
Solvent casting/particulate leaching has been used to synthesize highly porous polymeric scaffolds of controlled pore size, based on poly(methyl methacrylate) (PMMA) and poly(ε-caprolactone) (PCL). Obtained structures have a total porosity of c. 60%, with good interconnections between the pores. Porous scaffolds prepared using the greatest size of NaCl particles have the best mechanical properties. Both PMMA- and PCL-based materials can be sterilized by ionizing radiation. In the case of PCL-based scaffolds, irradiation causes cross-linking of polymer chains, which leads to an improvement of the mechanical properties of the scaffold. The compressive elastic modulus for non-porous samples increases with irradiation dose from 1.5 MPa for 0 kGy to 1.9 MPa for 280 kGy. Preliminary in vitro studies indicate good biocompatibility of both materials.
No takes yet. Share an insight, caveat, or question.
Filipczak et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: