Answers are grounded in this paper and cite their sources.
Experimental evaluation demonstrates enhanced dimethyl sulfide removal under high humidity via moderate catalyst heating, indicating viable applications for compact waste-treatment systems.
Dimethyl sulfide (DMS) is a representative reduced sulfur compound that is difficult to oxidize and remove, particularly under the high-humidity conditions commonly encountered in waste-treatment and biomass power plants. In this study, a practical strategy for DMS removal under high-humidity conditions was investigated by combining ozone oxidation with a low-cost iodate-impregnated activated carbon catalyst with moderate catalyst heating. Ozone was generated using a xenon excimer lamp, enabling a compact system design without the need for a pressure-swing adsorption oxygen generator and thereby making the system suitable for small-scale and distributed applications. The DMS removal performance was evaluated using a dynamic adsorption method under relative humidity (RH) conditions of 45% and 90%. At 25 °C and 45% RH, the treatment capacity and reaction rate constant were 15 wt% and 6.9 s−1, respectively, whereas these values decreased to 1.5 wt% and 4.9 s−1 at 25 °C and 90% RH, indicating that water vapor significantly interfered with DMS treatment through preferential adsorption. However, when the catalyst temperature was increased by 10 °C (from 25 °C to 35 °C) under high-humidity conditions, the treatment capacity and reaction rate constant improved to 2.8 wt% and 5.8 s−1, respectively. This enhancement was attributed to the asymmetric adsorption behavior of DMS and water vapor, whereby moderate heating reduced water adsorption and restored sites available for DMS adsorption.
No takes yet. Share an insight, caveat, or question.
Mizuno et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: