This is the authors' abstract. We don't add key points for this paper.
Cobalt-phosphate water oxidation catalysts were successfully deposited onto TiO 2 /ZnSe core/shell nanowire arrays by photo-assisted electrodeposition methods. Photoelectrochemical (PEC) properties of the resulting composite photoanodes were studied for solar-driven water splitting under back side illumination in 0.5 M Na 2 SO 3 electrolyte. Compared with pristine TiO 2 and TiO 2 /ZnSe nanowire arrays, the photoconversion efficiency in TiO 2 /ZnSe/Co-Pi composite photoanode was increased by 1.5 and 3.8 times at a bias voltage of 0.6 V vs . Ag/AgCl. More attractive, this triple TiO 2 /ZnSe/Co-Pi photoanodes show significantly improved PEC stability compared with the TiO 2 /ZnSe electrode, remaining 56% initial photocurrent after 4000 seconds persistent light irradiation. By using the electrochemical measurements, the reason for the improved performance of TiO 2 /ZnSe/Co-Pi is discussed in detail. It is proposed that the TiO 2 provided direct channel for electron transport, ZnSe photosensitizer extended the spectral response to the visible region, and the Co-Pi acts as hole transfer relay to accelerate the surface water oxidation reaction. The strategy for designing photoanode in this work is low-cost but effective, and could be extended to prepare other hybrid photoanode with elaborate textural characteristics.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: