Answers are grounded in this paper and cite their sources.
• Developed nanocomposite solid polymer electrolyte using solution casting method. • The composites show an ionic conductivity as high as 5.94 × 10 −5 S/cm at 30 °C. • XRD and DSC analysis confirmed a reduction in crystallinity. • Nanocomposite solid polymer electrolyte exhibits a high ion transport number. • Better battery performance obtained for 80PEG-20KNO 3 –6 wt.% TiO 2 electrolyte. In this study, nanocomposite solid polymer electrolytes (NSPEs) based on poly(ethylene glycol) (PEG), potassium nitrate (KNO 3 ), and titanium oxide (TiO 2 ) nanoparticles were synthesized using a solution casting technique. The impact of various TiO 2 nanoparticle concentrations on the structural, thermal, electrical and electrochemical properties of the NSPEs was investigated. X-ray diffraction analysis revealed a decrease in the degree of crystallinity of the PEG–KNO 3 electrolyte upon the addition of TiO 2 nanoparticles. Differential scanning calorimetry measurements showed a decrease in the melting temperature of the NSPE with the incorporation of 6 wt.% TiO 2 nanoparticle concentration. The ionic conductivity of the NSPEs increased with TiO 2 concentration up to 6 wt.% (σ = 5.94 × 10 −5 S/cm), beyond which a decrease was observed. Transference number measurements confirmed the dominance of ionic charge transport in the NSPE. A solid-state electrochemical cell fabricated using the optimal NSPE composition (80PEG–20KNO 3 –6 wt.% TiO 2 ) exhibited promising discharge performance under a constant load of 100 kΩ.
No takes yet. Share an insight, caveat, or question.
Polu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: