Answers are grounded in this paper and cite their sources.
A chloride‐based inorganic sol–gel route was used for preparing pure and metal (osmium, nickel, palladium, platinum)‐doped SnO 2 sol. SnCl 4 was first reacted with propanol, then the resulting compound was hydrolyzed and subsequently mixed with solutions of the metal dopants. The obtained sols were used for depositing thin films by spin coating or for preparing powders by solvent evaporation at 110°C. FTIR spectroscopy and thermal analysis of the powders revealed that chlorine still bound to tin stabilized the sol against gelation by hindering the condensation reactions. Film characterizations showed that platinum and palladium, unlike nickel and osmium, were likely to form nanoparticles in the SnO 2 lattice. This result was discussed with regard to the different ways that platinum and palladium, on one hand, and nickel and osmium, on the other, modified the growth of SnO 2 grains and the film roughness and morphology. Dopants that formed nanoparticles (platinum, palladium) resulted in the roughest film, while dopants that did not form particles (nickel, osmium) resulted in SnO 2 grain size very close to that of pure SnO 2 .
No takes yet. Share an insight, caveat, or question.
Epifani et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: