Answers are grounded in this paper and cite their sources.
Reducing clinker content through supplementary cementitious materials (SCMs) is a key strategy for lowering CO 2 emissions from cement production, but high substitution levels often create trade-offs between strength development and durability. This review provides a performance-based synthesis of low-clinker cement systems and examines how synergistic ternary and quaternary formulations overcome the limitations of binary binders. In binary systems, clinker dilution and delayed SCM reactivity frequently reduce early-age hydration, while later-age performance depends strongly on SCM type and curing; for instance, slag-based binders at 35–65% replacement can achieve 56–90 day compressive strengths comparable to ordinary Portland cement (OPC). Durability trends are similarly SCM-dependent, with reduced permeability and chloride ingress often accompanied by increased carbonation susceptibility due to lower alkaline reserve. Multi-SCM systems demonstrate clear synergies that enable higher clinker substitution while maintaining balanced performance. A ternary fly ash–limestone blend (25% fly ash + 10% limestone) achieved a 36% reduction in CO 2 emissions while maintaining 28-day strength near the reference, and a slag–limestone system (10% limestone + 35% slag) exceeded OPC 90-day strength by 7%. Durability gains are more pronounced in ternary and quaternary binders: a quaternary formulation with up to 75% cement replacement reduced rapid chloride permeability from 3100 to 1000 coulombs while also lowering sulfate expansion and steel mass loss. Overall, the evidence supports multi-SCM systems as a robust pathway toward low-carbon cements with clinker substitution exceeding 60% without compromising long-term performance.
No takes yet. Share an insight, caveat, or question.
Alsheikh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: