Answers are grounded in this paper and cite their sources.
This study investigates the influence of heat treatment on the corrosion behavior and stress corrosion cracking (SCC) resistance of a newly designed Cr-Ni-Mo low-nickel steel using microstructural characterization, electrochemical tests, hydrogen permeation, thermal desorption spectroscopy (TDS), and slow strain rate tensile (SSRT) experiments in a simulated thiosulfate-based H 2 S environment. It has been shown that the quenching and tempering (Q&T) steel exhibits a tempered martensitic microstructure with retained lath morphology, high dislocation density, carbide precipitation, and a large fraction of high-angle grain boundaries (HAGBs), providing active sites for corrosion initiation and higher SCC susceptibility. In contrast, the normalizing and tempering(N&T) steel develops granular bainite with uniformly distributed spherical carbides and fewer HAGBs, showing improved corrosion resistance and a smaller hydrogen diffusion coefficient. Hydrogen in N&T steel is mainly trapped by reversible carbide traps, whereas in Q&T steel it accumulates at dislocations and HAGBs. Fractography indicates that Q&T failure is dominated by anodic dissolution (AD) and hydrogen-enhanced decohesion (HEDE), while N&T failure involves AD and hydrogen-enhanced localized plasticity (HELP). Overall, the N&T process promotes a “low-energy grain boundary + compact corrosion film” structure, markedly enhancing resistance to H 2 S-induced SCC.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: