Answers are grounded in this paper and cite their sources.
The influence of solution and aging heat-treatments on the corrosion behavior of a biodegradable Mg–Y–Gd–Zr alloy was investigated. Electrochemical behavior was assessed by potentiodynamic polarization curves and electrochemical impedance spectroscopy in an aerated 0.9 wt.% NaCl solution at 37 °C ± 0.1, complemented by SEM, EDS, and XRD analyses of corrosion-products. The as-cast condition exhibited the highest polarization resistance and impedance modulus, attributed to a thicker and more resistive corrosion-product layer, despite microstructural heterogeneity. Solution heat-treatment (525 °C/24 h) homogenized the microstructure and shifted the corrosion potential to nobler values, but produced a thinner, less protective film and reduced corrosion resistance. Among aged conditions, aging at 250 °C for 100 h yielded the best performance, with higher polarization resistance and impedance modulus values indicative of a more uniform and stable surface layer. Overall, the results demonstrate that corrosion behavior is primarily governed by the stability and resistive character of the corrosion-product layer, which is strongly controlled by the heat-treatment-induced microstructural state.
No takes yet. Share an insight, caveat, or question.
Ferraz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: