This is the authors' abstract. We don't add key points for this paper.
This paper presents a low damage inductively coupled plasma (ICP) etching process to define sub-100 nm platinum gate lines for III–V metal–oxide–semiconductor field-effect transistors (MOSFETs) fabrication. In this process, a negative resist etching mask patterned by electron beam lithography is used to define the high resolution platinum features using a combination of SF 6 and C 4 F 8 etch gases. Systematic investigation of the impact of various etch conditions, such as coil and platen power, gas composition, chamber pressure on etch rate and profile, resulted in a controllable etching process. Optical emission spectra of the ICP plasma have been checked for better understanding the etching mechanism. Etch induced damage of the underlying device channel of the III–V MOSFET materials has been evaluated through monitoring the sheet resistance variation of the materials at room temperature, which showed the process does not significantly degrade the electrical properties of the underlying device channel under optimized conditions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: