Answers are grounded in this paper and cite their sources.
Sulfur hexafluoride (SF 6 ) is an established tracer for use in managed aquifer recharge projects. SF 6 exsolves from groundwater when it encounters trapped air according to Henry's law. This results in its retardation relative to groundwater flow, which can help determine porous media saturation and flow dynamics. SF 6 and the conservative, nonpartitioning tracer, bromide (Br − added as KBr), were introduced to recharge water infiltrated into stacked glacial aquifers in Thurston County, Washington, providing the opportunity to observe SF 6 partitioning. Br − , which is assumed to travel at the same velocity as the groundwater, precedes SF 6 at most monitoring wells (MWs). Average groundwater velocity in the unconfined aquifer in the study area ranges from 3.9 to 40 m/d, except in the southwestern corner where it is slower. SF 6 in the shallow aquifer exhibits an average retardation factor of 2.5 ± 3.8, suggesting an air‐to‐water ratio on the order of 10 −3 to 10 −2 in the pore space. Notable differences in tracer arrival times at adjacent wells indicate very heterogeneous conductivity. One MW exhibits double peaks in concentrations of both tracers with different degrees of retardation for the first and second peaks. This suggests multiple flowpaths to the well with variable saturation. The confining layer between the upper two aquifers appears to allow intermittent connection between aquifers but serves as an aquitard in most areas. This study demonstrates the utility of SF 6 partitioning for evaluating hydrologic conditions at prospective recharge sites.
No takes yet. Share an insight, caveat, or question.
Gerenday et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: