Answers are grounded in this paper and cite their sources.
Magnetic resonance imaging (MRI) was used to evaluate free water content and distribution in wood–plastic composite (WPC) materials decayed during exterior exposure because moisture is an essential factor for the progression of the decay process. Two segments of the same board were selected from six commercial decking boards that showed signs of decay (from a total of 27 boards that were exposed near Hilo, Hawaii). The decay process was indicated by the presence of fungal fruiting bodies. One of the two board segments was exposed in sun, the other in shadow. Whole board segments were imaged using a clinical MRI unit, and then selected areas were examined using scanning electron microscopy (SEM). Samples were cut from the cross section of the board to determine material density as an indicator of the degree of decay advancement. The presence of free water detected by MRI was correlated to the mechanism of decay in the WPC board segments and to the water distribution measured in the boards. Both board segments showed a significant amount of decay, where SEM images showed the presence of fungal hyphae inside the boards, particularly the segment exposed in shadow. MRI showed that the expected pattern of free water distribution—a moisture gradient from greatest on the outside of the board to least inside—was not evident in the decayed board evaluated in this study. On the contrary, a reverse moisture gradient was observed in some areas where there appeared to be a relatively high concentration of free water in the center of the board. This could be explained by moisture transfer of fungal mycelia into the core of the board and the generation of water as decay fungi metabolize wood.
No takes yet. Share an insight, caveat, or question.
Ibach et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: