Answers are grounded in this paper and cite their sources.
Forty-three cottons, varying widely in fibre properties, were used to determine the relationships between fibre and yarn tensile stiffness and toughness. The cottons were spun into a series of yarn numbers from 15/1 (40 tex) to 100/1 (6 tex), with a wide range of twists. A grouping of cottons emphasized the relationship between properties not evident when cottons were considered without regard to types. Fibre toughness decreased with fibre stiffness within three groups, but toughness increased with linear density among groups. The grouping influences were less pronounced in fibre-to-yarn than in fibre-to-fibre relationships. Yarn elongation increased with fibre elongation, regardless of yarn number, but this property was unrelated to fibre linear density, length, or tenacity. Appreciable differences in yarn elongation were obtained in any one yarn number as a result of fibre properties, independent of processing variables, and values among yarn numbers overlapped. Fibre stiffness and toughness varied directly with corresponding properties of yarns. Correlation of tensile stiffness in fibres to yarn was greater than for toughness. Yarn tensile stiffness varied considerably within yarn numbers, but no relationship to yarn number was evident. Overlapping of tensile stiffness values among yarn numbers occurred as with elongation values. There was a direct relationship between yarn number and toughness, the coarser yarns being “tougher” by virtue of their higher tenacity and elongation. In comparison of yarn properties, pronounced grouping influences were found on elongation, tensile stiffness, and toughness.
No takes yet. Share an insight, caveat, or question.
Fiori et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: