This is the authors' abstract. We don't add key points for this paper.
To develop doped carbon nanostructures as non‐precious metal cathode catalysts, nanocomposites were synthesized by using SBA‐15 and 5,10,15,20‐tetrakis(4‐methoxyphenyl)porphyrin–iron(III) chloride with different ratios of amorphous MoS2 precursor. From various analyses, it was found that, during pyrolysis at 900 °C under an N2 atmosphere, the amorphous MoS2 precursor decomposed into Mo and S, facilitating the formation of graphene sheet‐like carbon with MoC and doping of sulfur in the carbon. In the nanocomposite formed from 10 wt % MoS2 precursor (denoted as Mo/S/PC‐10), most of the MoS2 was decomposed, thus forming S‐doped carbon, which was grown on the MoC phase without crystalline MoS2. Furthermore, Mo/S/PC‐10 exhibited better performance in the oxygen reduction reaction (specific activity of 1.23 mA cm−2 at 0.9 V and half‐wave potential of 0.864 V) than a commercial Pt catalyst, owing to a heteroatom‐doped carbon nanostructure with a fairly high specific surface area. In the polarization curve of the unit‐cell performance measured at 80 °C under ambient pressure, Mo/S/PC‐10 as a cathode catalyst exhibited an optimal power density of 314 mW cm−2 and a current density of 280 mA cm−2 at 0.6 V.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Park et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: