This is the authors' abstract. We don't add key points for this paper.
Here, the ability of using p-type tin oxide (SnO x ) thin films as a thermal sensor has been investigated. Firstly, the thermoelectric performance was optimized by controlling the thickness of the SnO x film from 60 up to 160 nm. A high Seebeck coefficient of +263 μ V K −1 and electrical conductivity of 4.1 × 10 2 (S m −1 ) were achieved in a 60 nm thick SnO x film, due to a compact nanostructured film and the absence of the Sn metallic phase, which was observed for the thicker SnO x film leading to a typical thermoelectric transport properties of a n-type Sn film. Moreover, x-ray photoelectron spectroscopy revealed the co-existence of SnO (79.7%) and SnO 2 (20.3%) phases in the 60 nm thick SnO x film, while the optical measurements revealed an indirect gap of 1.8 eV and a direct gap of 2.7 eV, respectively. The 60 nm-SnO x thin film have been tested as a thermoelectric touch sensor, achieving a V signal / V noise ≈ 20, with a rise time <1 s. Therefore, this work provides an efficient way for developing highly efficient thermal sensors with potential use in display technologies.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Vieira et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: