Answers are grounded in this paper and cite their sources.
The application value of functionally gradient materials in the field of material and structural design has been widely recognized, and attention to related research has been increasing. Additive manufacturing is an advanced technology that combines the advantages of in situ controllability, free manufacturing capability, and near-net shape forming, and has become the dominant method for functionally gradient material manufacturing. Despite numerous advancements in the research on titanium-alloy gradient materials, their application in practical scenarios is still constrained by their weak bonding interface and inadequate mechanical properties. In this study, resistive thermal fusion interface additive manufacturing was employed to fabricate functionally gradient materials joined with TC4 and TA7 titanium alloys. After fabricating the TC4 titanium alloy section, a TA7 titanium alloy section was directly deposited onto it. Compositional, grain morphological, microstructural, and mechanical property analyses were conducted for TC4, TA7, and their interfaces. These results suggested that the titanium alloy gradient exhibited excellent tensile characteristics. Additionally, this study elucidates the impact of the microstructures of TA7 and TC4 on the mechanical performance. Notably, the interface showed excellent metallurgical bonding, and the tensile specimen fractured on the TA7 side rather than at the interface. In addition, the strengthening mechanism of the gradient bonding area was investigated via finite element analysis, and hetero-deformation-induced strengthening was confirmed to be a critical factor for boosting the gradient material strength. In summary, this study provides meaningful guidance for additive manufacturing of functionally gradient materials with superior bonding interfaces and mechanical performance.
No takes yet. Share an insight, caveat, or question.
Lv et al. (2026) studied this question.