Answers are grounded in this paper and cite their sources.
End-suspended wall support systems require high stability of the underlying rock wall section, especially in foundation excavations without rock shoulders, yet existing specifications provide limited guidance on stability evaluation. Based on the deep foundation excavation of Lingnan Square Station on Guangzhou Rail Transit Line 12, this study applies the upper-bound limit analysis method to evaluate the stability of rock wall sections supported by end-suspended walls without rock shoulders. A strength reserve safety factor is introduced to derive analytical formulas for the safety factor and required supporting force, and the assumed failure mechanisms are qualitatively assessed using numerical displacement contours and convergence behavior. The results indicate that stability is governed by two dominant failure mechanisms: a combined rotation and translation mode and a combined translation, rotation and translation mode. The calculated safety factor ranges from 0.12 to 2.72 and from 0.36 to 2.03 under the two modes, respectively. Parametric analysis shows that increasing the uniaxial compressive strength of intact rock from 4 to 20 MPa increases the safety factor by >50%. Grey relational analysis shows that the shear strength of the underlying rock primarily controls the combined rotation and translation mode, while the depth of the rock-retaining section dominates the combined translation, rotation and translation mode. The proposed approach provides a practical theoretical basis for the design and stability evaluation of end-suspended wall-supported foundation excavations in soil-rock composite strata.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: