Answers are grounded in this paper and cite their sources.
The atomization characteristics of liquid jets in crossflow (LJIC) under sub-atmospheric pressure conditions are critical to the performance of high-speed propulsion systems. This study systematically investigated the effects of operating parameters on the primary breakup and droplet size distributions of the LJIC under sub-atmospheric pressure conditions. Experiments were conducted at inlet air pressures of 40–100 kPa and velocities of 52.08–190.95 m/s, corresponding to the gaseous Weber numbers We g of 15.51–435.47, the gaseous Reynolds numbers Re g of 138,804–1,066,277, and the liquid–gas momentum flux ratios q of 12.58–4372.87. Planar Mie scattering and a laser particle size analyser were used to obtain information on atomization. A novel spray image-processing method based on two-dimensional Fast Fourier Transform (2D-FFT) spatial frequency spectral analysis was proposed to identify the breakup regime. The “Band Intensity ( BI )” value was calculated by integrating the intensity of a specific frequency band from the frequency domain of the images. A larger BI corresponded to a sharper, more irregular gas–liquid interface, indicating a less developed breakup state. Subsequently, a primary breakup regime map under sub-atmospheric pressure was constructed. The observed transition boundary from surface breakup to column breakup was qualitatively consistent with the literature, with a higher intercept. This difference in intercept can be primarily attributed to lower liquid turbulence level and lower Re g , which tended to weaken surface breakup at the same q and We g under sub-atmospheric pressure conditions. Furthermore, decreasing Re g suppressed leeward-side surface breakup, whereas the windward side remained largely unaffected. In the far field, the Re g had a negligible influence on Sauter Mean Diameter ( SMD ).
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: