Answers are grounded in this paper and cite their sources.
본 논문에서는 금이 증착된 측면연마 광섬유를 2μm 대역 편광기로 이용하여 Thulium/Holmium 첨가 광섬유 기반 링 캐비티로부터 모드 잠금 레이저를 구현할 수 있음을 실험적으로 보였다. 모드 잠금 현상은 광섬유로 구성된 공진기 내부에서 진행하는 빔이 겪는 Nonlinear Polarization Rotation 현상에 기반하여 삽입된 금 증착 측면연마 광섬유에서 발생되는 Nonlinear Transmission 반응에 의해 유도되었다. 또한 공진기로부터 발생되는 출력 1.93μm 파장의 광펄스를 Thulium/Holmium 첨가 광섬유 증폭기를 통과시켜 Higher Order Soliton Effect를 통해 압축시킴으로써 최대 첨두 출력 ~6.7 kW를 갖는 펄스폭 ~558 fs의 고출력 펨토초 펄스를 얻을 수 있음을 실험적으로 보였다. We experimentally demonstrate the use of a gold-deposited side-polished fiber as a 2-μm -band polarizing device to produce mode-locked pulses from a thulium/holmium-codoped fiber ring cavity. The mode-locking effect was induced by nonlinear transmission caused by the gold-deposited side-polished fiber, due to nonlinear polarization rotation of the oscillated beam within the fiberized cavity. It is also shown that ~558-fs pulses with a peak power of ~6.7 kW could readily be produced at a wavelength of 1935 nm through subsequent thulium/holmium-codoped fiber amplification, due to the higher-order soliton compression effect.
No takes yet. Share an insight, caveat, or question.
Jung et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: