Answers are grounded in this paper and cite their sources.
The reutilization of construction and demolition (C&D) waste has emerged as an effective strategy for reducing the environmental impacts associated with conventional construction materials. This study investigates the stabilization of C&D aggregates using geopolymer binders based on metakaolin (MK) and silica fume (SF), activated by sodium hydroxide (NaOH) and sodium silicate (Na 2 SiO 3 ), with a systematic staged screening of MK-SF combinations and partial substitution of Na 2 SiO 3 by SF to enhance mechanical performance and microstructural characteristics. A multi-stage experimental program was conducted in which MK was incorporated at 5-15% of the aggregates, followed by partial replacement of Na 2 SiO 3 with SF (25-100% by mass of Na 2 SiO 3 ), and finally partial substitution of MK with SF at equivalent mass replacement levels (25–100% of the MK precursor). The engineering performance of the stabilized mixtures was evaluated through mechanical and microstructural analyses. The results showed that 10% MK provided the most favorable binder content among the tested mixtures, achieving a UCS of 0.98 MPa, approximately 170% higher than unbound aggregates, together with significant improvements in ITS and UPV. Partial replacement of Na 2 SiO 3 with SF further enhanced the mechanical performance, with 25% replacement producing a UCS of 1.26 MPa and an ITS approximately 35% higher than the MK-only mixture. The highest strength was obtained when 75% of MK was replaced by SF (M-SF75), achieving a UCS of 1.85 MPa, representing the best-performing mixture under the investigated conditions. Microstructural analysis provided evidence consistent with the formation of denser geopolymer matrices and stronger interparticle bonding, suggesting the development of geopolymer gel and higher Si/Al ratios. Furthermore, life cycle assessment (LCA) revealed that M-SF75 achieved the highest eco mechanical efficiency, reducing primary energy demand (PED) to 272.4 MJ/t (approximately 50% lower than M10) despite generating 37.9 kg CO 2 eq/t. These findings demonstrate the technical feasibility of employing screened MK-SF geopolymer systems to stabilize recycled C&D aggregates, providing an alternative with calculated lower cradle-to-gate PED and greenhouse gas emissions under the investigated assumptions for sustainable civil infrastructure applications.
No takes yet. Share an insight, caveat, or question.
Khoshdel et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: