Answers are grounded in this paper and cite their sources.
Flow constriction, whether man-made or natural, occurs whenever there is a significant reduction of the width of natural flow and hence the induced beds shear stress increases considerably and consequently the bed sediment within the contraction get scoured. The problem is often idealized as a rectangular long contraction consisting of a contracted zone, length of which is greater than the transverse width of the flow. From the literature survey, it is revealed that several empirical models were proposed to compute the maximum equilibrium scour depth at contraction. In almost all the reported investigations, bed sediment used were non-cohesive sand, except one or two where bed sediment was made up of clay and completely cohesive in nature. In the present investigation, an attempt has been made to study the scour in long contraction for the sediment comprises the mixture of clay and fine sand with varying proportions. A total of 30 experimental runs in laboratory flume on clay–sand mixed cohesive sediment were carried out to study the effect of varying clay fraction, approach flow velocity and contraction ratio, on maximum equilibrium scour depth and its location within long contraction.
No takes yet. Share an insight, caveat, or question.
Chaudhuri et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: