Answers are grounded in this paper and cite their sources.
Where a channel has a limited data rate or a digital store has a limited capacity, it is sometimes essential to reduce the data rate of pulse-code-modulated color television signals. One direct way of doing this is to lower the encoding frequencyfs, but the Nyquist sampling limit is soon reached and further reduction results in beat distortions due to “alias components” when the lower sidebands of fsoverlap the baseband video frequencies. NTSC television signals can be digitally encoded at sub-Nyquist rates by placing the alias components into those parts of the spectrum not normally occupied by the luminance or chrominance components of the video signal. By the proper choice of comb filters (two types are specified), most of the alias signals can be removed from the baseband video. In the system examined, fsis exactly 2fsc+ 1/4 fhor 2fsc— 1/4fh, where fscis the NTSC color subcarrier frequency and fhis the line-scan frequency. Comb filtering is done between fs— f,vand fvwhere fv, is the baseband video bandwidth. Frequency response equalization is performed within the comb-filtered frequency band. Two modifications to the basic system were studied: using constant vertical quadrature phase sampling and performing comb filtering prior to digital encoding. Color slides and test waveforms encoded by this technique were viewed and found to be subjectively acceptable.
No takes yet. Share an insight, caveat, or question.
John Rossi (1976) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: