Answers are grounded in this paper and cite their sources.
A heavy ion beam probe diagnostic was installed on T-10 tokamak. Cs+ and Tl+ beams with the energy 100–280 keV and intensity about a few dozen μA were used. The diagnostic is able to make two-dimensional measurements of plasma parameters along the detector line. The detector grid covered the first quadrant of the plasma cross section. The measurements are possible with r/a=0.3–1, and ω=0°–90° for B=1.5 T and Cs+ ions. High-voltage stabilizers keep the analyzer and accelerator voltage drift on the level ΔU/U∼10−5. An absolute in situ calibration of the energy analyzer, using He target will allow to make a more accurate absolute referencing of the potential. The time dependence of the local plasma parameters was obtained. A scan along the detector line by variation of injection angle and obtaining the whole profile during one pulse is possible. The diagnostic is also sensitive to poloidal magnetic field.
No takes yet. Share an insight, caveat, or question.
Melnikov et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: