Answers are grounded in this paper and cite their sources.
Microfibrillated cellulose (MFC) was functionalised using a reactive ionic liquid monomer, i.e. , glycidyltriethylammonium chloride (GTEAC), via chain-growth polymerisation, resulting in a novel cationic polyelectrolyte-grafted quaternised MFC (QMFC). The degree of quaternisation and maximum ion exchange capacity of the resulting QMFC were 2.13 mmol/g ( i.e. , 132 mg/g) and 1.51 mmol/g ( i.e. , 94 mg/g), respectively. Small-angle X-ray scattering (SAXS) and wide-angle X-ray scattering (WAXS) experiments confirmed the retention of monoclinic crystalline structure for cellulose I with the corresponding decrease in the degree of crystallinity from 85% to 56% and the increase in the spacing between cellulose crystallites by 35%. The presence of the amorphous and grafted polymers was confirmed by microscopy, thermal analysis, and water sorption experiments. QMFC filter cartridges were prepared and tested under dynamic flow conditions with a pressure of 0.2 MPa (retention time of 0.5 min). These cationic polyelectrolytes enhanced multi-site ion exchange interactions as evidenced by the Freundlich sorption isotherm. The QMFC filter cartridges demonstrated high anion removal efficiency values of 83.2%, 98.1%, and 94.9% for NO₃⁻, SO₄²⁻, and PO₄³⁻, respectively. This system achieved a process mass efficiency of 2.79, an E -factor of 1.97, and an energy efficiency score of 66.3, which conforms to the green chemistry principles and demonstrates high potential for sustainable water purification.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: