Answers are grounded in this paper and cite their sources.
Establishing a mechanistic linkage between in-situ monitoring signals and terminal functional performance is pivotal for smart manufacturing. This study proposes a closed-loop verification nexus linking “in-situ machining signals–microstructural evolution–macroscopic corrosion performance” for 304 austenitic stainless steel under heavy-duty cutting conditions. Using a smart toolholder to acquire multiaxial loads, specific cutting energy ( ) and dynamic vibration ( ) were derived as precursor characterization indicators to evaluate the impact of a large-gradient depth of cut (DOC). Results demonstrate that escalating the DOC drastically increases (from 0.2 to 5.12 J/mm 3 ), which triggers severe dynamic vibrations. This increased energy input fundamentally promotes severe plastic deformation and grain-boundary reconfiguration in the near-surface region, manifesting as grain refinement (decreasing to 23.55 μm) and topographical degradation ( escalating to 429 nm). Furthermore, the multiscale mechanisms of DOC-induced corrosion degradation are elucidated: the proliferation of highly active grain boundaries synergized with a geometrically roughened surface dramatically accelerates micro-galvanic corrosion, increasing the corrosion current density (I corr ) up to 0.044 μA/cm 2 . A monotonic association is observed across the evaluated conditions between the and terminal degradation (I corr ). It should be noted that this correlation is based on three DOC levels and should be interpreted as an exploratory trend rather than definitive predictive evidence. These findings suggest that specific cutting energy has the potential to serve as an early warning indicator for surface integrity degradation, highlighting the underlying energy-driven microstructural degradation mechanisms revealed by in-situ mechanical signatures.
No takes yet. Share an insight, caveat, or question.
Qiao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: