Answers are grounded in this paper and cite their sources.
A large-area (2′’ x 2′’) single layer graphene film is grown on a 25μm thick copper foil substrate via Chemical Vapor Deposition technique. We further establish the transfer of graphene film from the copper foil to suspended structures fabricated on Si/SiO 2 substrate via a wet etching process utilizing ammonium persulfate solution, effectively removing the copper foil while preserving the structural integrity and quality of the graphene film. Fabrication of suspended structures on the Si/SiO 2 substrate involves a 3-level photolithography process, ensuring precise control over structural design. This approach enabled the creation of suspended platforms with depth of ∼1 µm. Characterization studies involving Raman analysis, scanning electron micrograph and electrical measurements confirm the high quality and integrity of the transferred graphene film onto suspended structures fabricated on Si/SiO 2 substrate. We observed significant improvement in graphene quality over suspended structure in respect of sheet resistance (∼400 Ω/□), carrier mobility (∼2800 cm 2 /v-s), mechanical flexibility and overall device performance. The transfer characteristics of the suspended back-gate Field Effect Transistor exhibited a shift in the Dirac point from approximately −5 V to near 0 V. This enhancement effectively reduces substrate interactions and enhances the intrinsic electronic properties of the graphene channel. Overall, this method presents a viable approach for the scalable production of large-area graphene films and their transfer onto diverse substrates, opening avenues for the integration of graphene into advanced technological devices and systems particularly in micro and nano electromechanical systems.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: